_{<noscript id="kap6u"></noscript>}

The function of an oil injector is to use a small amount of lubricating oil as power

time:2021-08-20 09:19:15Views:

The function of the oil injector of Lianyungang Lingdong Electromechanical Equipment Co., Ltd. is to use a small amount of lubricating oil as power, suck in a large amount of oil, and supply lubricating system and main oil pump with oil at a certain pressure. The nozzle of the oil injector is connected to the outlet of the main oil pump that provides power oil. High pressure oil leaves the nozzle at a high speed and enters the expansion pipe, forming a negative pressure at the nozzle mouth. Under the action of the negative pressure, the oil in the oil tank enters the joint chamber of the injector through the filter screen, and together with the ejected injection oil, enters the expansion pipe. The kinetic energy of the oil in the expansion pipe is converted into pressure energy.

我手機圖片 353.jpg

我手機圖片 355.jpg

我手機圖片 354.jpg

The appearance of the oil supply injector and the lubricating oil supply injector are completely identical, and it is difficult to distinguish them from each other in appearance. Therefore, attention should be paid when installing them. The difference method is to install the product logo at the diffusion pipe of each injector, which is written as "I" and "II" respectively. "I" represents the oil supply injector, "II" represents the lubricating oil supply injector. Alternatively, the oil injector 1 # (also known as the oil injector) and the lubricating oil injector 2 # (also known as the second oil injector) can be divided into 1 and 2 oil injectors.

To be more specific, the unit is usually equipped with two oil injectors, installed below the liquid level in the lubricating oil tank. When the unit is put into operation at or near the rated speed. The oil injector consists of a nozzle, a mixing chamber, a diffusion tube, etc. After the pressure oil from the main oil pump passes through the nozzle, the oil velocity increases and forms a low-pressure zone in the chamber. The oil in the tank is pumped into the injector chamber, and then it is carried by a high-speed oil belt into the diffuser throat. The velocity decreases in the diffuser and is converted into pressure energy. Then, through an oil cooler, it is sent through a pipe to the bearing manifold and the main oil pump suction port. Diffusion - equipped with a rocker check valve at the back to prevent oil from flowing back from the system. A check plate is installed on the surface of the oil tank in the chamber to prevent backflow into the oil tank during the operation of the bearing oil pump. To prevent foreign objects from entering the oil injector, a detachable perforated steel plate filter screen is installed on the oil suction side of the injector. The oil injector is one of the essential equipment in the lubricating oil system of the steam turbine generator set. In the lubricating oil system of the steam turbine generator set, the oil injector equipment can be divided into oil supply injectors and lubricating oil supply injectors according to its working purpose. Its working medium is L-TSA 46 turbine oil, with a working oil temperature of 0 ℃ to 70 ℃. When the unit reaches or approaches the rated speed, it is put into operation.

你可能喜歡看：

Installation and working engineering an style="color: red;">ofan> coal powder sampler

11-25

1018

an style="color: red;">Thean> installation and operation an style="color: red;">ofan> an style="color: red;">Thean> coal powder sampler and mobile coal powder sampler an style="color: red;">ofan> Lianyungang Lingdong Electromechanical Equipment Co., Ltd. drill holes on an style="color: red;">Thean> flue, extend an style="color: red;">Thean> sampling tube into an style="color: red;">Thean> flue, and make an style="color: red;">Thean> sampling head face an style="color: red;">Thean> direction an style="color: red;">ofan> an style="color: red;">Thean> incoming smoke flow.

an style="color: red;">Thean> purpose an style="color: red;">ofan> fly ash sampler

11-25

933

an style="color: red;">Thean> purpose and an style="color: red;">functionan> an style="color: red;">ofan> an style="color: red;">Thean> fly ash sampler produced by Lianyungang Lingdong Electromechanical Equipment Co., Ltd. is that an style="color: red;">Thean> carbon content an style="color: red;">ofan> ban style="color: red;">oilan>er fly ash is an important indicator reflecting an style="color: red;">Thean> combustion rate an style="color: red;">ofan> coal-fired ban style="color: red;">oilan>ers in an style="color: red;">Thean>rmal power plants.

squirting air extractor

08-20

929

Fan silencer

08-20

929

Assembly and installation an style="color: red;">ofan> an style="color: red;">oilan> injectors

11-25

921

an style="color: red;">Thean> an style="color: red;">oilan> supply and lubrication an style="color: red;">oilan> injectors are completely identical in structure, mainly composed an style="color: red;">ofan> orifice nozzles, diffusion tubes, sleeves, filters, etc.

an style="color: red;">Thean> principle an style="color: red;">ofan> steam jet pump and steam injector

11-25

854

A steam injector is a device that is powered by steam and is needed in modern engineering. It does not require electricity, has no moving or rotating parts, is simple in system, and works reliably, so it is used.

an style="color: red;">Thean> basic principle an style="color: red;">ofan> lubricating an style="color: red;">oilan> system injectors

11-25

810

an style="color: red;">Thean> an style="color: red;">oilan> injector is composed an style="color: red;">ofan> a nozzle, a filter screen, an expansion pipe, and an inlet pipe. In addition to supplying an style="color: red;">Thean> inlet an style="color: red;">oilan> an style="color: red;">ofan> an style="color: red;">Thean> centrifugal main an style="color: red;">oilan> pump, it also supplies lubricating an style="color: red;">oilan> system and sealing an style="color: red;">oilan> system an style="color: red;">oilan>.

Vapor-liquid two-phase flow is used in continuous sewage expansion vessel

08-20

783

Lianyungang Lingdong Electromechanical Equipment Co., Ltd. is a manufacturer an style="color: red;">ofan> gas-liquid two-phase flow and electric auxiliary equipment such as continuous discharge expansion vessels.

Portable constant velocity fly ash sampler for regular coal powder sampling on an style="color: red;">Thean> air and coal powder pipeline

08-20

779

an style="color: red;">Thean> portable constant velocity fly ash sampler produced by Lianyungang Lingdong Electromechanical Equipment Co., Ltd., also known as an style="color: red;">Thean> fly ash constant velocity sampler or an style="color: red;">Thean> swirling fly ash constant velocity sampler,

Working status an style="color: red;">ofan> an style="color: red;">oilan> injector and main an style="color: red;">oilan> pump

11-25

769

an style="color: red;">Thean> working status an style="color: red;">ofan> an style="color: red;">Thean> an style="color: red;">oilan> injector and main an style="color: red;">oilan> pump, an style="color: red;">Thean> analysis an style="color: red;">ofan> an style="color: red;">Thean> reasons for an style="color: red;">Thean> drop in an style="color: red;">Thean> inlet an style="color: red;">oilan> pressure test an style="color: red;">ofan> an style="color: red;">Thean> main an style="color: red;">oilan> pump an style="color: red;">ofan> a 200MW steam turbine, and an style="color: red;">Thean> composition an style="color: red;">ofan> an style="color: red;">Thean> an style="color: red;">oilan> supply system an style="color: red;">ofan> an style="color: red;">Thean> 200MW steam turbine generally adopt a centrifugal main an style="color: red;">oilan> pump an style="color: red;">oilan> supply system with dual injectors.

凝汽器换管-胶球清洗装置-二次滤网_连灵动

Home

About us

News

Product

Service support

Online inquiry

Contact us

The function of an oil injector is to use a small amount of lubricating oil as power

Recommended products

Steam seal heater tube replacement and renovation

Sealing cooler tube replacement

Air cooler tube replacement

Heat recovery device tube replacement

Positive displacement heat exchanger tube exchange

Condenser tube replacement

Replacing pipes for marine oil coolers

Tube replacement of turbine oil cooler

Replacing the tube of the shaft seal heater

Tube replacement of tube type oil cooler

Oil water cooler tube replacement

Tube replacement of tubular oil cooler

產品動態

Working principle of automatic steam liquid two-phase flow t

The functions of lubrication oil tank injector 1 # and injec

The basic principle of lubricating oil system injectors

The principle of steam jet pump and steam injector

Calculation of cooling area of sampling cooler

Fly ash sampler sampling

Various forms of coal powder samplers

Working status of oil injector and main oil pump

Assembly and installation of oil injectors

Installation and working engineering of coal powder sampler

A coal powder sampler can also be referred to as a portable

The role of the oil injector in the lubricating oil tank of

Subscribe

Contact Way

Follow us